GenEX Series GEX 40/45/50

Wet and uneven floors, and tight working environments are not a problem for the GEX40/45/50, just enjoy the exceptional performance and maneuverability. Various options ensures that you will always have the right truck for your working conditions.

The low step height means frequent entry and exit is easy and less tiring for the operator.
Superelastic tyres provide a soft ride and allow for indoor/outdoor operation.

The 80 volt high performance drive and lift systems allow the GEX to rival internal combustion truck performance in speed, acceleration and gradeability.

Driving with remarkable acceleration, gradeability, and stability is always available with GEX dual drive motors. Each motors’ speed and direction is proportionally regulated by steer tyre position. A sharp-turn steer axle enables 101% perfect turning radius.

Smooth Control + Easy Operation =
Operator Confidence & Optimum Comfort

HEAVY DUTY AC DRIVE MOTORS

Fewer Parts & Minimum Wear = Less Downtime and Cost = Higher Return on Investment

• Enclosed

• Brushless

• Thermal protection

• Stall protection

• Suitable for wet applications

• Dual/powered reversing for tight turns

REGENERATIVE & WET DISC BRAKES

Three Forms of Regenerative Braking

• Accelerator release. (Proportional to accelerator position)

• Change of direction. (Proportional to accelerator position)

• Service brake. (Foot Brake)

Wet Disc Brakes

• Enclosed and oil cooled for smooth, quiet operation.

• Built with long life lining material.

• Less downtime.

High Performance

• Rivals IC truck performance in speed, acceleration and gradeability.

More Efficient System

• Higher Voltage = Lower cable Loss & Heating = Greater Efficiency

Auto Shut-Down

• Protects your investment. The motor temperature is always monitored, in case of overheating the motors performance will automatically be reduced.

Better Suited to Fast/Rapid Charge

• GEX 40/45/50 can accommodate a 840/930 battery.

• GEX 40/45/50 with spacer can accommodate a 750/775Ah battery.

• The rear control cover is hinged and supported by gas struts for easy service access from a standing position. On board diagnostics allow servicing mechanic to check fault codes via display without service tool.

• Triple stage mast with 2 primary cylinders giving an excellent view.

Anti-Rattle Upright

• Shims added to reduce rattle when forks are lowered.

• Robust and warp resistant design

• Smooth transitions between the upright stages

• Wide vision window

• Nested & interlocked cold rolled rails for strength & stability

• Canted/angled totally sealed roller bearings – friction free

• 6- Canted carriage rollers are standard

Twin motor drive

• Provides added traction, especially on wet or uneven surfaces.

Anti scuff protection

• Inside wheel is speed adjusted in tight turns preventing scuffing of steer tyres like conventional 4-wheel trucks.

Steer Sensor

• Relays steer tyre position to control.

Low center of gravity

• low positioning of battery between the axles gives a low center of gravity for optimum stability.

Speed control when cornering

• Reduces truck travel speed in turns.

• Enough Ground clearance for indoor and outdoor applications.

Fully Adjustable/Programmable

• The operator can select from 4 pre-set performance modes.

• Additional adjustments can be made to maximize performance in certain operations.

Alarm codes

• Indicates the current alarm code and stores previous alarm codes for quick access.

Password Protected

• Certain adjustments are password protected to allow only authorized operators to make adjustments.